Philips D630 - Set the Baby Cry Level

34 EN
4 Enter a telephone number, then press
[Save] to conrm.
Note
• You can still send an alert to the external line even
though it is in the blacklist (see 'Blacklist' on page 30).
• If the external line is in the outgoing call block list, it
will be barred and the alert will not be sent (see 'Call
barring (block outgoing calls)' on page 30).
Send to a contact from the
phonebook
1 Select [Menu].
2 Press / to select , then press
[Select].
3 Select [Send alert to] > [Select number],
then press [OK] to conrm.
4 Select a contact from the phonebook, then
press [OK] to conrm.
Set the baby cry level
You can set the baby cry level to adjust the
sensitivity of the baby monitor.
[Mild] More sensitive
[Moderate] Default
[Loud] Less sensitive
1 Select [Menu].
2 Press / to select , then press
[Select].
3 Select [Baby cry level], then press [OK] to
conrm.
4 Select a new setting, then press [OK] to
conrm.
» The setting is saved.