24
Activate/deactivate alarm timer
1 In the standby mode, press SLEEP/TIMER
repeatedly.
If timer is activated, »
is displayed.
If timer is deactivated, »
disappears on
the display.
Tip
Alarm timer is not available when the source is •
set as “ MP3 LINK ” or “ AUX ”.
If CD/USB/iPod/iPhone source is selected but no
•
disc is placed or no USB/iPod/iPhone connected,
the system switches to FM automatically.
Set the sleep timer
This apparatus can switch to standby
automatically after a set period.
1 When the apparatus is turned on, press
SLEEP/TIMER repeatedly to select a
preset period (in minutes).
When sleep timer is activated, »
is
displayed.
To deactivate sleep timer
1 Press SLEEP/TIMER repeatedly until [SLE
OFF] is displayed.
Listen to an audio device
You can listen to an audio device through this
apparatus.
1 Ensure the external audio device
is connected to this apparatus (see
“Connect” > “Connect an external audio
device”).
2 Press MP3 LINK/AUX repeatedly to select
the audio input through the MP3-LINK
socket or AUX IN ( L and R ) sockets.
3 Start to play the device (see the device
user manual).
Listen through headphone
1
Plug a headphone into the socket.
10 Other features
Activate demonstration mode
You can see an overview of all features.
1 In the standby mode with clock display
(if set), press
on the main unit to
activate the demonstration mode.
A demonstration of major available »
features starts.
To deactivate the demonstration mode:
1 Press on the main unit again.
Set alarm timer
This unit can be used as an alarm clock. You can
select CD, iPod/iPhone, FM or USB as alarm source.
Note
Ensure that you have set the clock correctly. •
1 In standby mode, press and hold SLEEP/
TIMER until [SET TIMER] (set timer)
scrolls on the display.
2 Press SOURCE repeatedly to select a
source: CD, FM, USB, iPod/iPhone or
iPod/iPhone playlist.
If iPod/iPhone playlist is selected as •
alarm source, you need create a playlist
called “PHILIPS” in your iPod/iPhone.
If no playlist called “PHILIPS” is •
created in the iPod/iPhone or no
track is stored in the playlist, the unit
switches to iPod/iPhone alarm source.
3 Press SLEEP/TIMER to con rm.
The hour digits are displayed and begin »
to blink.
4 Press VOL +/- repeatedly to set hour, and
then press SLEEP/TIMER again.
The minute digits are displayed and »
begin to blink.
5 Press VOL +/- to set minute, and then
press SLEEP/TIMER to con rm.
6 Press VOL +/- to adjust volume, and then
press SLEEP/TIMER to con rm.
A clock icon appears on the display. »
EN
To Next Page
Loading...
