Philips DCM2055 - Playing Audio Sources; Playing Discs and USB Devices; iPod;iPhone Audio Playback

13EN
4 Play
Play disc
1
Press to open the disc tray.
2 Insert a disc with the printed side facing up.
3 Press to close the disc tray.
4 Press
CD
on the remote control to select
the disc source.
» [Reading] (reading) blinks for a
moment, then CD starts playing
automatically. If not, press
.
Play from USB
Note

Make sure that the USB device contains playable audio
content.
1 Insert the USB storage device into the
socket.
2 Press USB on the remote control to select
the USB source.
» Play starts automatically. If not, press
.
Play from iPod/iPhone
You can enjoy audio from iPod/iPhone through
this unit.
Compatible iPod/iPhone
The unit supports the following iPod and
iPhone models:
Made for.
 iPod touch (1st, 2nd, 3rd, and 4th
generation)
 iPod nano (2nd, 3rd, 4th, 5th, and 6th
generation)
 iPhone 4
 iPhone 3GS
 iPhone 3G
 iPhone
Load the iPod/iPhone
1 Push to open the dock compartment.
2 Place the iPod/iPhone in the dock.
Downloaded From Disc-Player.com Philips Manuals