16 EN
5 Listen to FM
radio
Tune to FM radio stations
Note
Position the antenna as far as possible from TV, VCR, or
other radiation source.
Ensure that you have connected and fully extended the
supplied FM antenna.
1 Press FM to select FM tuner mode.
2 Press and hold / for 3 seconds.
» [SEARCH] (search) is displayed.
» The unit tunes to an FM station with
strong reception automatically.
3 Repeat step 2 to tune to more stations.
To tune to a weak station:
Press
/
reception.
Program FM radio stations
automatically
Note
You can program a maximum of 20 preset FM radio
stations.
In FM tuner mode, press and hold PROG for 3
seconds.
» [AUTO] (auto) is displayed.
» The unit stores all the FM radio
stations automatically and then
station.
Program FM radio stations
manually
1
In tuner mode, tune to an FM radio station.
2 Press
PROG
to activate programming
mode.
»
[PROG]
(program) blinks.
3 Press / repeatedly to select a channel
number.
4 Press
PROG
5 Repeat steps 1-4 to store other FM
stations.
Note
To remove a pre-stored station, store another station
in its place.
Select a preset radio station
In tuner mode, press / or the numeric
buttons to select a preset number.
Select stereo/mono broadcast
Note
Stereo broadcast is the default setting for tuner mode.
For stations with weak signals: to improve the reception,
change to monaural sound.
In FM tuner mode, press OK to switch between
mono and stereo broadcast.
Downloaded From Disc-Player.com Philips Manuals
To Next Page
Loading...
