Philips DCM580 - Sound Settings and Features; Volume and Sound Effects; Mute and Special Modes; Sleep and Alarm Timers

16
10 Other features
Set the sleep timer
This unit can switch to standby automatically
after a set period of time.
1 When the unit is turned on, press SLEEP
repeatedly to select a set period of time
(in minutes).
When sleep timer is activated, the »
display shows [SLEEP](sleep)
.
To deactivate sleep timer
1 Press SLEEP repeatedly until “OFF” is
displayed.
When sleep timer is deactivated, »
[SLEEP](sleep)
disappears on the
display.
Set the alarm timer
This unit can be used as an alarm clock. The
DISC, TUNER, USB or iPhone/iPod is activated
to play at a preset time.
1 Ensure that you have set the clock
correctly.
2 Press and hold TIMER.
3 Press CD, USB, TUNER or iPhone/iPod
to select a source.
4 Press TIMERWRFRQÀUP
The hour digits are displayed and begin »
to blink.
5 Press / to set the hour.
6 Press TIMERWRFRQÀUP
The minute digits are displayed and »
begin to blink.
7 Press / to set the minute.
8 Press TIMERWRFRQÀUP
The timer is set and activated.»
9 Adjust sound
Adjust volume
1
During play, press VOL +/- to increase/
decrease the volume.
Adjust subwoofer volume
1 During play, press SUB.VOL to increase/
decrease the volume.
Select a preset sound effect
1
During play, press DSC repeatedly to
select:
>)/$7@ÁDW
[POP] (pop)
[JAZZ] (jazz)
[ROCK] (rock)
[CLASSIC] (classic)
Enhance bass
1
During play, press DBB to turn on or off
dynamic bass enhancement.
If DBB is activated, DBB is displayed.»
Immerse music over a wider
spot
1
During play, press LIVING SOUND on
the remote control to turn on or off the
sound effect.
If Living Sound is activated, »
is displayed.
Mute sound
1
During play, press MUTE to mute/unmute
sound.
EN