EasyManua.ls Logo

Philips DCM580 - Advanced Features; External Device and Light Effects

Philips DCM580
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17
11 Product
information
Note
Product information is subject to change
without prior notice.
6SHFLÀFDWLRQV
$PSOLÀHU
Rated Output
Power
140 W RMS
Frequency
Response
100 Hz - 16 kHz, ±3 dB
Signal to Noise
Ratio
>70dB
Aux Input 0.5 V RMS 20kohm
Disc
Laser Type Semiconductor
Disc Diameter 12cm
Support Disc CD-DA, CD-R, CD-RW,
MP3-CD, WMA-CD
Audio DAC 24Bits / 44.1kHz
Total Harmonic
Distortion
<1%
Frequency
Response
60Hz -16kHz (44.1kHz)
S/N Ratio >65dBA
Activate and deactivate the alarm
timer
1 Press TIMER repeatedly to activate or
deactivate the timer.
If the timer is activated, the display »
shows
.
If the timer is deactivated, »
disappears on the display.
Note
If CD/USB/iPhone/iPod source is selected but
the device is not available, tuner is activated
automatically.
Listen to an external device
You can also listen to an external audio device
through this unit.
1 Press MP3 LINK to select MP3 link
source.
2 Connect the supplied MP3 link cable to:
the  MP3 LINK jack on this unit
the headphone jack on the device
3 Start to play the device. (See the device
user manual).
Turn on or off the light effect
1
In standby mode, press and hold
PRESET + on the main unit for more
than 4 seconds to turn on or off the light
effect.
English
EN

Other manuals for Philips DCM580

Related product manuals