DreamStation Go
Basic Setup & Return Instructions
Package Contents
• Basic Setup and Return Instructions
• Accessory Cleaning and Inspection Instructions
• User Manual
• Replacement DreamStation Go device
Your Current DreamStation Go device Your Replacement DreamStation Go
Do not return
Please keep the following device components and accessories from your current device, you may need them to
setup your replacement device (if applicable).
Humidier Mask Power Cord Tubing microSD Card
Please follow the “Accessory Cleaning and Inspection Instructions” provided and if you notice any black foam
particles, please contact Philips.
!
• DreamStation Go • DreamStation Go
• Power Cord
• Humidier
• microSD card
• Mask
• Filter
• Power Cord
• Filter
• Tubing• Tubing
Components Optional Accessories Components (shipped device)
Important:
!
The enclosed DreamStation Go device is provided to you as a replacement for your current DreamStation Go device.
This document provides basic instructions for setting up your replacement device and for returning your current device.
To ensure proper return of your current device, please follow the instructions provided below.