Philips DS8550/93 - Getting Started; Remote Control Setup

12
3 Get started
Caution
Use of controls or adjustments or performance of procedures other than herein •
may result in hazardous radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in sequence.
If you contact Philips, you will be asked for the model and serial number of
this apparatus. The model number and serial number are on the bottom of
the apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Prepare the remote control
Caution
Riskofexplosion!Keepbatteriesawayfromheat,sunshineorre.Neverdiscard •
batteriesinre.
For rst-time use:
1 Remove the protective tab to activate the remote control battery.
To replace the remote control battery:
1 Open the battery compartment.
2 Insert one CR2025 battery with correct polarity (+/-) as indicated.
3 Close the battery compartment.
EN
DS8550_93_UM_V1.0.indb 12 2010-10-15 10:42:01