6 When prompted for a password, enter “0000”.
Doublebeeptoneconrmationisheardandthe » LED turns on
stably if connection is successful.
If the pairing cannot be completed within one minute, » LED turns
off.
Tip
IfyourBluetoothdeviceisalreadypairedwithDS8550before,youjustneedtond •
outthe“PHILIPSDS8550”onyourBluetoothmenu,thenconrmtheconnection.
To disconnect Bluetooth
1 Turn off the connected device or move it beyond the communication
range.
» LED turns off.
Play audio les from bluetooth devices
Note
Make sure the Bluetooth connection between the unit and the device is active. •
To start play, press • on the remote control.
To pause/resume play, press • again.
To track up/down, press forward/backward keys.•
Play from an external device
You can also listen to an external audio device through this unit.
1 Press to select Aux-in mode.
2 Connect the supplied Aux-in link cable to:
the • AUX IN jack (3.5mm) on the back of the unit.
the headphone jack on an external device.•
3 Start to play the device (see the device user manual).
EN