Philips DS8550/93 - Connect Power

13
Note
Beforepressinganyfunctionbuttonontheremotecontrol,rstselectthecorrect •
source with the remote control instead of the main unit.
If you are not going to use the remote control for a long time, remove the battery. •
Connect power
Caution
Risk of product damage! Ensure that the power supply voltage corresponds to the •
voltage printed on the bottom of the unit.
Risk of electric shock! When you unplug the AC adaptor, always pull the plug from •
the socket. Never pull the cord.
Before connecting the AC adaptor, ensure you have completed all other •
connections.
1 Insert the plug from the AC adaptor to the DC IN socket on the
back of the main unit.
2 Connect one end of the AC power cord to the AC adaptor.
3 Connect the other end of the AC power cord to the wall outlet.
English
EN
DS8550_93_UM_V1.0.indb 13 2010-10-15 10:42:02