n Battery usage CAUTION – To prevent battery leakage
which may result in bodily injury, property damage, or
damage to the unit:
Install all batteries correctly, + and - as marked on the unit. •
Do not mix batteries (old and new or carbon and •
alkaline, etc.).
Remove batteries when the unit is not used for a long time.•
o Apparatus shall not be exposed to dripping or splashing.
p Do not place any sources of danger on the apparatus (e.g.
liquid lled objects, lighted candles).
Safety-Important notes for users in the U.K.
Mains plug
This apparatus is tted with an approved 13 Amp plug. To change
a fuse in this type of plug proceed as follows:
a Remove fuse cover and fuse.
b Fix new fuse which should be a BS1362 3 Amp, A.S.T.A. or
BSI approved type.
c Ret the fuse cover.
If the tted plug is not suitable for your socket outlets, it
should be cut off and an appropriate plug tted in its place.
If the mains plug contains a fuse, this should have a value
of 3 Amp. If a plug without a fuse is used, the fuse at the
distribution board should not be greater than 3 Amp.
Note: The severed plug must be disposed off to avoid a
possible shock hazard should it be inserted into a 13 Amp
socket elsewhere.
EN
To Next Page
Loading...
