EasyManua.ls Logo

Philips DTM5095 - Compatible iPod;iPhone;iPad; Load the iPod;iPhone;iPad; Listen to the iPod;iPhone;iPad; Play from USB

Philips DTM5095
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11EN
Compatible iPod/iPhone/iPad
he unit supports the following iPod/iPhone/iPad
models.
Made for
iPad Mini
iPad 4
iPhone 5
iPod nano 7th generation
iPod touch 5th generation
Load the iPod/iPhone/iPad
Insert the iPod/iPhone/iPad in the dock.
Listen to the iPod/iPhone/iPad
Note
Make sure that your iPod/iPhone/iPad has been loaded
securely.
1 Press DOCK on the remote control or
tap SRC repeatedly on the main unit to
select DOCK source.
2 Play audio on your iPod/iPhone/iPad.
» The audio in connected iPod/iPhone/
iPad streams from this docking system
automatically. If not, press .
To navigate the menu: press MENU/
, and press / / / to select,
and then press OK to conrm.
Charge the iPod/iPhone/iPad
When the unit is connected to power, the
docked iPod/iPhone/iPad begins to charge
automatically.
Remove the iPod/iPhone/iPad
Pull the iPod/iPhone/iPad out of the dock.
Play from USB
Note
Ensure that the USB device contains playable audio
content.
1 Press MP3 LINK/USB repeatedly on the
remote control or tap SRC repeatedly on
the main unit to select the USB source.
2 Insert the USB device into the (USB)
socket on the back of the unit.
» The le starts playing automatically. If
not, press .