Philips DTM5095 - Program tracks; Display ID3 information

14 EN
• (shufe): All tracks are played in a
random sequence.
2 To return to normal play, press REPEAT/
SHUFFLE repeatedly until repeat/shufe
mode is no longer displayed.
Note
• The repeat and shufe play cannot be activated at the
same time.
• Shufe play cannot be selected when you play
programmed tracks.
Program tracks
You can program a maximum of 20 tracks.
1 In CD/USB mode, at the stop position,
press PROG/CLOCK SET to activate the
program mode.
» [PROG] (program) blinks on the
display.
2 For MP3/WMA tracks, press / to
select an album.
3 Press / to select a track number,
and then press PROG/CLOCK SET to
conrm.
4 Repeat steps 2 to 3 to program more
tracks.
5 Press to play the programmed tracks.
» During play, [PROG] (program) is
displayed.
• To erase the program, in the stop
position, press .
Display ID3 information
In CD mode, during play, press CD/ID3 to
display the following information:
• Track number
• Play time
• Title name
• Artist name
• Album name