Philips DTM5095 - Product information; Specifications; USB playability information

18 EN
9 Product
information
Note
• Product information is subject to change without prior
notice.
Specications
Amplier
Rated Output Power 200 W
Frequency Response 100 Hz - 16 kHz,
±3 dB
Signal to Noise Ratio >70 dB
MP3 LINK Input <600 mV RMS
Disc
Laser Type Semiconductor
Disc Diameter 12 cm
Support Disc CD-DA, CD-R,
CD-RW, MP3-CD,
WMA-CD
Audio DAC 24 Bits / 44.1 kHz
Total Harmonic
Distortion
<1%
Frequency Response 60 Hz -16 kHz (44.1
kHz)
S/N Ratio >65 dBA
Tuner
Tuning Range FM: 87.5 -
108 MHz
Tuning grid 50 KHz
Sensitivity
- Mono, 26dB S/N Ratio
- Stereo, 46dB S/N Ratio
<22 dBf
<51 dBf
Search Selectivity <30 dBf
Total Harmonic Distortion <3%
Signal to Noise Ratio >70 dBA
Speakers
Speaker
Impedance
6 ohm + 3 x 6 ohm
Speaker Driver 5.25" woofer + 3 x 2.75"
full range
Sensitivity >82 dB/m/W
General information
AC power 220 - 240 V, 50/60
Hz
Standby Power
Consumption
< 0.5 W
USB Direct Version 2.0/1.1
Load of USB ≤500 mA
Dimensions
- Main Unit (W x H x D)
300 x 994 x 300
mm
Weight
- With Packing
- Main Unit
13.2 kg
10.2 kg
USB playability information
Compatible USB devices:
• USB ash memory (USB 2.0 or
USB1.1)
• USB ash players (USB 2.0 or USB1.1)
• memory cards (requires an additional
card reader to work with this unit)
Supported formats:
• USB or memory le format FAT12,
FAT16, FAT32 (sector size: 512 bytes)