Philips DTM5096 - Loading iPod;iPhone;iPad; Listening to Docked Devices; Playing from USB

12 EN
Load the iPod/iPhone/iPad
Insert the iPod/iPhone/iPad in the dock.
Listen to the iPod/iPhone/iPad
Note
• Make sure that your iPod/iPhone/iPad has been loaded
securely.
1 Press DOCK on the remote control or
tap SRC repeatedly on the main unit to
select DOCK source.
2 Play audio on your iPod/iPhone/iPad.
» The audio in connected iPod/iPhone/
iPad streams from this docking system
automatically. If not, press .
• To navigate the menu: press MENU/
, and press / / / to select,
and then press OK to conrm.
Charge the iPod/iPhone/iPad
When the unit is connected to power, the
docked iPod/iPhone/iPad begins to charge
automatically.
Remove the iPod/iPhone/iPad
Pull the iPod/iPhone/iPad out of the dock.
Play from USB
Note
• Ensure that the USB device contains playable audio
content.
1 Press MP3 LINK/USB repeatedly on the
remote control or tap SRC repeatedly on
the main unit to select the USB source.
2 Insert the USB device into the (USB)
socket on the back of the unit.
» The le starts playing automatically. If
not, press .