18 EN
8 Other features
Set the sleep timer
This docking system can switch to standby
automatically after a set period of time.
1 When the unit is turned on, press SLEEP/
TIMER repeatedly to select a set period of
time (in minutes).
» When sleep timer is activated, is
displayed.
To deactivate sleep timer
1 Press SLEEP/TIMER repeatedly until
[SLEEP OFF] (sleep off) is displayed.
» When sleep timer is deactivated,
disappears.
Set the alarm timer
This docking system can be used as an alarm
clock. You can select CD, FM TUNER, iPod/
iPhone/iPad, or USB as alarm source.
Note
• Ensure that you have set the clock correctly.
1 In standby mode, press and hold SLEEP/
TIMER until [SET TIMER](set timer) scrolls
on the display.
2 Press CD, USB, DOCK, or TUNER to
select a source.
3 Press SLEEP/TIMER to conrm.
» The hour digits are displayed and begin
to blink.
4 Press / to set the hour, and then
press SLEEP/TIMER again.
» The minute digits are displayed and
begin to blink.
5 Press / to set the minute.
6 Press SLEEP/TIMER to conrm.
» The alarm timer is set and activated.
Note
• To exit the alarm timer setting without storing, press
MENU/ .
Activate and deactivate the alarm
timer
In standby mode, press SLEEP/TIMER
repeatedly to activate or deactivate the alarm
timer.
» If the alarm timer is activated, is
displayed
» If the alarm timer is deactivated,
disappears.
Note
• If CD/USB/DOCK source is selected, but no disc is
placed or no USB/iPod/iPhone/iPad is connected, the
FM TUNER is selected automatically.
Listen to an external device
You can also listen to an external audio device
through this docking system.
1 Press MP3 LINK to select audio in source.
2 Connect the supplied MP3 link cable to:
• the MP3 LINK jack on the back of the
unit
• the headphone jack on the device
3 Start to play the device. (See the device
user manual).
To Next Page
Loading...
