39EN
Recording
Playback EditingIntroduction Connections Basic Setup Function Setup Others
39EN
TIMER RECORDING
1
Press [TIMER].
2
Use [K / L] to select “New Program”,
then press [OK].
Timer Programming
1/1
MON JAN/01 11:00AM
Date Start End CH
New Program
3
Use [K / L] to enter the date, then
press [B].
Timer Programming
1/1
MON JAN/01 11:00AM
Date Start End CH
New Program
Date
JAN/02
CH
DTV125. 1
Mode
SP
SP 2 : 00
Start
- - : - -
End
- - : - -
Daily
MON-SAT
JAN/01
JAN/31
MON-FRI
SAT
FRI
SUN
You can program the unit to record up to 12 programs
within a month in advance. Daily or weekly program
recordings are also available.
Before recording, make sure
• Set the clock before setting a timer programming.
• Insert a recordable disc with enough recordable space.
Note
• If you have not set the clock yet:
“Clock Setting” menu will appear instead of the timer
programming list at step 1. Continue with the step 4
in “Manual Clock Setting” on page 28 before setting
a timer programming.
• Use [s / B] to move the cursor to the left and the
right in “Timer Programming” menu.
Instructions continue on the next page.
Guide to Timer Programming Display
Timer Programming
1/1
MON JAN/01 11:00AMSP (1:00)
JAN/ 2/07 12:00 AM 125.1 SP
Date Start End CH
JAN/02 12:00AM 1:00AM DTV125. 1
New Program
1
5
3
4
2
1 Title of a timer program (Contains date, time, channel,
recording mode of the program)
2 Current date and time
3 Recording mode, and length of the recording
4 Timer program list
5 Total number of pages and current page (2 pages
maximum)
When pressing [L] at
the current date, the
date will change as
follows.
e.g.) January 1st
E7H40UD_EN_v5.indd 39E7H40UD_EN_v5.indd 39 2008/06/02 14:49:502008/06/02 14:49:50
To Next Page
Loading...
