English
14
Remote Control (continued)
Using the remote control
A
Open the battery compartment.
B
Insert two batteries type R03 or AAA,
following the indications (+-) inside
the compartment.
C
Close the cover.
D
Point the remote control directly at the
remote sensor (iR) on the front panel.
E
Select the source you wish to control by
pressing the DVD, VCR or SOURCE
button on the remote control.
F
Then select the desired function (for
example m, M).
CAUTION!
– Remove batteries if they are
exhausted or if when the remote
control is not to be used for a long
time.
– Do not mix batteries (old and new
or carbon and alkaline, etc.).
– Batteries contain chemical
substances, so they should be
disposed of properly.
A
C
B
DVDR3510V_eng_26244.indd 14DVDR3510V_eng_26244.indd 14 2007-08-01 1:46:16 PM2007-08-01 1:46:16 PM
Downloaded From Disc-Player.com Philips Manuals
To Next Page
Loading...
