English
33
Setting a timer recording from
an external Cable Box/ Satellite
Receiver
If you have a Satellite Receiver/Cable Box
connected to this recorder through the
EXT2 AUX-I/O SCART connection (see
“Step 2: Optional Connections”), follow
the steps described below to programme
the recordings.
A
Select the channel you want to record on
the Satellite Receiver/Cable Box.
B
Programme the recording with the
required information. Follow the steps
A
~
H
of “Timer Recording (manually)”
on the previous page.
Note: At { Source } entry, select
{ EXT2 } as the input source for
recording.
C
Leave the Satellite Receiver/Cable Box
switched on for the recording.
Changing/ Deleting a timer
recording
A
Turn on the TV to the correct viewing
channel for the recorder (e.g. ‘EXT’, ‘0’,
‘AV’).
B
Press TIMER on the remote control.
The timer schedule list appears.
Timer Schedule 09 : 05 : 56
1
2
3
4
5
6
Source Dest Rec Mode Date Start End VPS
P003
SPDVDR
DVDR
DVDR
VCR
05/01/06
14.00 15.30
P010
P005
P008
EP
SP
SP
25/01/06
30/01/06
31/01/06
02.00
17.00
12.30
06.30
18.15
14.00
On
Off
On
Off
C
Use ST keys to select a timer
programme which you want to change/
delete.
D
To delete the timer entry, press
CLEAR on the remote control.
E
To change the timer schedule, press
OK to enter the timer editor menu of
the selected timer programme.
Timer Editor 09 : 05 : 56
OK
OK CANCEL
Date
Start
End
01 / 01 / 06
10 : 33
11 : 03
Source
Ch003
Rec Mode
SP
Mode
Once
VPS/PDC
Off
Dest
DVDR
F
Select the entry eld and make the
necessary changes.
G
Once complete, move to
OK
in the
menu and press OK to save the changes.
H
Press TIMER to exit the menu.
Timer Recording (continued)
TIPS: Ensure that there is suf cient space available on the recordable DVD or VHS tape before
recording. You have to nalise the DVD±R before it can be played back on other players.
DVDR3510V_eng_26244.indd 33DVDR3510V_eng_26244.indd 33 2007-08-01 1:46:19 PM2007-08-01 1:46:19 PM
Downloaded From Disc-Player.com Philips Manuals
To Next Page
Loading...
