English
50
Problem Solution
Troubleshooting (continued)
Need Help? Visit us at www.philips.com/support
No HDMI video output
No HDMI audio output
– HDMI connection can only be made to HDMI-equipped
devices with HDCP (High Bandwidth Digital Content
Protection). Use a separate adaptor (DVI to HDMI) for
DVI TV connection (equipped with HDCP).
– Make sure the resolution of this DVD player matches the
TV device you have connected using the HDMI; See if the
TV supports 480p/576p/720p/1080i DVD player.
– When connecting to a non-HDCP complaint TV, the
HDCP warning message will appear.
– Check the connection between the TV and HDMI of
DVD player.
– During resolution selection for DVI TV, a distorted or
black screen may appear, see HDMI Video Setup.
– There will be no sound from the HDMI output if the
source device is only DVI/HDCP (High Bandwidth Digital
Content Protection)- compatible.
– It is not possible to output SACD or copy-controlled
DVD audio souces from the HDMI connection.
01-53_dvp3960_37_eng2.indd 5001-53_dvp3960_37_eng2.indd 50 2006-12-28 11:24:52 AM2006-12-28 11:24:52 AM
To Next Page
Loading...
