EasyManua.ls Logo

Philips DVP5992 - Connecting Your DVD Player; Video Connection Options; Audio Connection Guide

Philips DVP5992
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
Note
Refer to the type plate at the back or bottom of the
product for identi cation and supply ratings.
Before you make or change any connections, ensure that
all the devices are disconnected from the power outlet.
Connect video cables
Connect this product to TV to view disc play. Select
the best video connection that TV can support.
Option 1: Connect to the HDMI jack (for a HDMI,
DVI or HDCP-compliant TV).
Option 2: Connect to the component video jacks
(for a standard TV or Progressive Scan TV).
Option 3: Connect to the scart jack (for a standard
TV)).
Option 4: Connect to the video (CVBS) jack (for a
standard TV).
Note
You must connect this product directly to a TV.
Option 1: Connect to the HDMI jack
1
Connect an HDMI cable to:
the HDMI OUT jack on this product.
the HDMI input jack on the TV.
Note
If the device supports HDMI CEC, you can control
compliant devices with a single remote control (see “Get
started” > “Use Philips EasyLink).
HDMI IN
HDMI OUT
e BACK
Return to the previous display menu.
f
/
Skip to the previous or next title, chapter,
or track.
g
Switch to the USB mode.
h Numeric buttons
Select an item to play.
i SUBTITLE
Select a subtitle language on a disc.
Access the menu of copying/deleting USB
audio fi les.
j
ZOOM
Fit the picture display to the TV screen.
Zoom the picture in or out.
k REPEAT
Select various repeat play modes.
l REPEAT A-B
Repeat play for a speci c section.
m AUDIO/CREATE MP3
Select an audio language or channel on
a disc.
Access the menu of creating MP3 fi les.
n
Stop play.
o
Start, pause or resume disc play.
p
INFO
For discs, access the play options or
display the current disc status.
For slideshows, display a thumbnail view
of photo fi les.
q OK
Con rm an entry or selection.
r SETUP
Access or exit the setup menu.
3 Connect
All audio/video cables are sold separately.
Make the following connections to use this product.
Basic connections:
Video
Audio
Optional connections:
Route audio to other devices:
Digital amplifi er/receiver
Analog stereo system
USB fl ash drive
EN

Other manuals for Philips DVP5992

Related product manuals