Philips DVT2050/00 - 9.1.5 Setting the timer

29
Settings
7
Press the record key g to start recording.
X If this feature is on, the [ symbol is displayed.
Note
• Noise reduction is only possible with PCM recording quality €. If
you switch on noise reduction, the device automatically switches
to PCM recording quality €.
9.1.5 Setting the timer
You can use this function to start a recording at a specified date and
time. The device can record from the device's microphone or an
external microphone.
1
In stop mode (start-up screen), press the menu key.
2
Press the h / b key to select the record settings menu Ó.
3
Press the record key g to confirm.
4
Press + / – to select the Timer function.
5
Press the record key g to confirm.
6
Press + / – to select the Set the begin function to set the alarm.
7
Press the record key g to confirm.
8
Press +/– to select the Set date function.
9
Press the record key g to confirm.
10
Set the date as described in (see also chapter 9.3.1 Set date & time,
page 33).
11
Press the record key g to confirm.
12
Press +/– to select the Set time function.
13
Press the record key g to confirm.
14
Set the time as described in (see also chapter 9.3.1 Set date & time,
page 33).
15
Press the record key g to confirm.
16
Press the stop key j.
17
Press + / – to select the Duration function to set the recording
duration.
18
Press the record key g to confirm.
19
Press + / – to set the required recording duration. Press no limit
for unlimited recording.
20
Press the record key g to confirm.
21
Press + / – to select the Record source function to set the sound
source.