36 Service
9
Use + / – OK to select.
10
Press the record key g to confirm.
Tip
• Press the j key to cancel the operation without saving and return
to the stop mode.
10.1.3 Device reset
This function is used to return all settings to the factory defaults.
Recordings and files are not deleted.
1
In stop mode (start-up screen), press the menu key.
2
Press h / b to select the device settings menu Õ.
3
Press the record key g to confirm.
4
Press + / – to select the Reset default function.
5
Press the record key g to confirm.
6
Use + / – OK to select.
7
Press the record key g to confirm.
X All device settings will be reset to the factory defaults. You
must reset the display language, date and time (see also chapter 4.3
Initial installation process, page 15).
To Next Page
Loading...
