Why some picture elements do not light up on Philips Digital Signage?
This display is manufactured using an extremely high level of precision technology: however, sometimes some pixels of the display may not display. This is not a malfunction.
What to do if the picture on my Philips Digital Signage is distorted?
If the picture is distorted with abnormal patterns, it could be due to these reasons: 1. The signal cable is not connected properly. Make sure that the signal cable is firmly attached. 2. The input signal is beyond the display's capabilities. Check the video signal source to ensure it is within the display's range, referring to the display’s specification section.
What to do if the Philips Digital Signage image doesn’t fill the screen?
If the display image doesn’t fill up the full size of the screen, it could be due to: 1. The zoom mode is not set correctly. Use the Zoom mode or Custom zoom function in the Screen menu to fine-tune display geometry and time frequency parameter. 2. Scan Mode may be set incorrectly to underscan. 3. If the image exceeds the screen size, Scan Mode may need to be set to Underscan.
Why is there interference on my Philips Digital Signage display?
Interference displayed on the display or audible noise is often caused by surrounding electrical appliances or fluorescent lights. Try moving the display to another location to see if the interference is reduced.
Why do I see after-images on my Philips Digital Signage?
After-images can occur if a still picture is displayed for an extended period. To prevent this, avoid displaying a still image for an extended period of time, as this can cause a permanent after-image to remain on the display.
Why is coffee leaking from the dispensing spout of my Philips Coffee Maker?
If coffee leaks from the dispensing spout of your Philips Coffee Maker, the spout is likely clogged. Clean the coffee dispensing spout and its holes.
Why can I see picture but no sound is heard on my Philips Monitor?
If you can see a picture but hear no sound on your Philips Monitor, check the following: 1. Ensure both video and sound input cables are correctly connected. 2. Make sure the volume isn't turned all the way down; press the volume buttons to increase it. 3. Verify that Mute is off using the Mute button. 4. If using external speakers, ensure they are connected and the volume is at a suitable level.
How to fix a Philips Coffee Maker that does not turn on?
If your Philips Coffee Maker doesn't turn on, ensure it's properly connected to the electric network and that the power button is switched to the “I” position.
Why can't my device connect to my Philips Speaker System soundbar?
If a device cannot connect with your Philips soundbar, it might be due to several reasons. The device may not support the compatible profiles required for the soundbar. Ensure you have enabled the Bluetooth function of the device (refer to the device's user manual). Also, check if the device is correctly connected. If the soundbar is already connected to another Bluetooth device, disconnect that device and try again.
How to reset Master PIN Code on Philips Door locks?
If you forgot your Master PIN Code for your Philips Door locks, perform a factory reset. This will clear all PIN codes, and the Master PIN Code will revert to the default: 12345678.
To Next Page
General