Philips FR 910 - Page 5

You only have to install your system once.
Please make the following connections
(whenever applicable).
Vote: Switch off the receiver before making
any connections.
CONNECTIONS
D eneaeeanintebanaen lem sanenlitenenumemnuane tarmmmanreticaarectonamamnmaae
Tecantenntearanenceanmnatneemmmnameemmantenmenuetmemeemtranmeae
A ANTENNA C
~ FM 75 © - The FM terminal is used for con-
nection to the Community or Cable Antenna
system or to a roof-mounted FM antenna
If none of these are available, you may use the
wire Supplied for nearby stations (reception =
could be poor).
~ GND - terminal for connection of the ground z
wire of your antenna.
ivi — For AM reception connect the supplied
wires to the GND and AM antenna terminals om
(one wire to the GND and one wire to the AM
terminal) and position the antenna for be
reception.
Note: Do not place the A
tne unit, as this unit employs a
! e which could cause
aR
device
PHONO
wire of a
Ov
Bh
AUDIO IN/OUT
PHONO — input soc
record player with an ‘MM’ (Moving Ma
cartridge.
CD — input sockets for connecting a CD
(Compact Disc) player.
TAPE/DCC — input and ou Utput sockets for
connecting a cassette deck or a Digital
Compact Cassette deck.
TV/AUX input sockets for connecting the
und channel of a TV set or video recorder
and output kee for extra Sound recording
equipment e.g. a cassette or tape deck ora
HiFi Stereo video recorder.
Ol