EasyManua.ls Logo

Philips FWM996 - Switching the System to Standby Mode; Power-Saving Automatic Standby; DIM Mode; Volume Control

Philips FWM996
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English
14
Basic Functions
Switching the system to standby
mode
In any other source mode
Press 2.
The clock will appear on the display when the
system is in standby mode.
Power-saving automatic standby
As a power-saving feature, the system will
automatically switch to Standby mode if you do
not press any buttons within 15 minutes after a
disc/USB has stopped playing.
Dim mode
You may select three levels of display brightness.
Press DIM on the remote control to select :
DIM 1, DIM 2, DIM 3 or DIM OFF.
Volume control
Adjust VOLUME to increase (turn knob
clockwise or press VOL + on the remote
control) or decrease (turn knob anti-clockwise
or press VOL - on the remote control) the
sound level.
To switch off the volume temporarily
Press MUTE on the remote control.
Playback will continue without sound and the
MUTE is displayed.
To restore the volume, press MUTE again or
increase/decrease the volume level.
Karaoke
Connect a microphone (not supplied) to the
system allowing you to sing along with the music
source.
1 Connect a microphone to the MIC 1/2 jack.
Before connecting the microphone, set the
microphone MIC VOL to the minimum level to
prevent howling sound.
2 Press DISC (or DISC 1/2/3, CD 1/2/3),
TUNER, AUX/MP3 LINK (or AUX) or
USB to select the source to be mixed and start
playback.
3 Adjust the volume level of the source with
VOLUME control.
4 Adjust the microphone volume with the
microphone MIC VOL control.
5 Adjust the echo level with the
KARAOKE ECHO VOL control.
Note:
–Keep the microphone away from the speakers to
prevent howling.
Light control
There are 6 button’s LEDs on the front panel of
the set. Different LEDs will turn on or flash in
different styles when the set is in different
situations.
Lighting in normal modes
As shown in the table below, by pressing (or
rotating) the corresponding buttons, the
respective LEDs light up or flash.
LED definition
Normal Mode
SATNDBY
Indicator
DBB
Indicator
VOLUME
Indicator
USB
Indicator
USB
Ripping
Indicator
MAX
Indicator
Standby mode On
POWER ON On Half lighted On
DBB ON On
MAX ON On
VOLUME setting Flashes
USB Mode On
USB Ripping/deletion Flashes
FWM996_85_Eng 9/18/08, 16:1114

Other manuals for Philips FWM996

Related product manuals