English
31
The remote control does not function
properly.
The time is not working.
The Clock/Timer setting is erased.
Some files on the USB device are not
displayed.
“DEVICE NOT SUPPORTED” scrolls on the
display.
✔ Select the source (DISC or TUNER, for example)
before pressing the function button (ÉÅ,í,ë).
✔ Reduce the distance between the remote
control and the system.
✔ Insert the batteries with their polarities
(+/– signs) aligned as indicated.
✔ Replace the batteries.
✔ Point the remote control directly towards the IR
sensor.
✔ Set the clock correctly.
✔ In standby mode, press SLEEP/TIMER on the
remote control to switch on the timer.
✔ Power has been interrupted or the power cord
has been disconnected. Reset the clock/timer.
✔ Check if the number of folders exceeds 99 or
the number of titles exceeds 999.
✔ Remove the USB mass storage device or select
another source.
Tr oubleshooting
Problem
Solution
FWM996_85_Eng 9/18/08, 16:1231
To Next Page
Loading...
