24 EN
Problem Possible cause Solution
The beeps occur
before soymilk is
ready.
Too much ingredient is added. Make sure that the water level is
between 上水位 (the maximum
level indication) and 下水位
(the minimum level indication).
The appliance is broken. Contact the Philips Consumer
Care Centre.
The sea level of your region is
too high.
This appliance can only be used
in regions no more than 1000 m
above mean sea level.
The appliance begins
stirring once you
press any button.
The appliance is broken. Contact the Philips Consumer
Care Centre.
To Next Page
Loading...
