Philips HD3037 - Using the Multicooker; Preparation Before First Use; Preparations Before Cooking

8
EN
Preparations before cooking
Before using the multicooker, you need to
follow below preparations:
1 Measure the rice using the measuring cup
provided.
2 Wash the rice thoroughly.
3 Put the pre-washed rice in the inner pot.
4 Add water to the level indicated on the
scale inside the inner pot that corresponds
to the number of cups of rice used. Then
smooth the rice surface.
5 Press the lid release button to open the lid.
6 Wipe the outside of the inner pot dry, then
put it in the multicooker. Check if the inner pot
is in proper contact with the heating element.
7 Close the lid of the multicooker, and put
the plug in the power socket.
3 Using the multicooker
Beforerstuse
1 Take out all the accessories from the inner
pot. Remove the sheet between the inner
pot and the heating element.
2 Clean the parts of the multicooker
thoroughly before using the multicooker
for the rst time (see chapter ‘Cleaning’).
Note
• Make sure all parts are completely dry before
you start using the multicooker.
EN