Philips HD5730 - Preparing Frothed Milk Separately; Frothing Milk for Drinks


1 Fill the milk jug and insert it into the appliance.
2 Placeasufcientlylargecupunderthemilkfrothingpipe.
3 Press the automatic cappuccino or latte macchiato button twice
within 3 seconds.
The display reads ‘FROTHED MILK’ and after a few seconds the
appliance starts to produce frothed milk.
Note: If you want some extra frothed milk in your cup, press the previously
selected button again within 3 seconds after the appliance has stopped
frothing milk. Keep the button pressed until the cup contains the desired
amount of frothed milk and then release the button.
Note: You can interrupt the milk frothing process at any time by pressing the
cappuccino or latte macchiato button again.
4 After frothing milk, clean the milk frothing pipe with the CLEAN
button (see section ‘Cleaning the milk frothing pipe with the CLEAN
button’ in this chapter).

1 Attach the hot water spout to the nozzle.
2 Place a cup under the hot water spout.
,
EnglisH16