Philips HD8828 - Using the Machine for the First Time; Circuit Priming

13 ENGLISH 13
USING THE MACHINE FOR THE FIRST TIME
When using the machine for the  rst time, the following activities need to
happen:
1) The machine will prime the circuit;
2) The machine will perform an automatic rinse/self-cleaning cycle.
3) You need to perform a manual rinse cycle.
Circuit Priming
During this process, fresh water  ows through the internal circuit of the
machine and the machine warms up. This takes a few minutes.
1
Place a container under the co ee dispensing spout and under the
water dispensing spout.
YellowYellowYellow Green
2
Press the “ ” button to start the circuit priming cycle.
3
The machine reminds you to install the water dispensing spout.
Press the “
” button to con rm.
The machine will start dispensing hot water.
4
The bar under the icon shows the operation progress. When the pro-
cess has been completed, the machine stops dispensing automatically.
5
The control panel now shows the machine warm-up icon.