Philips HR2380/05 - Using the Pasta Maker; Start Preparation

8
ENGLISH
4 Put the shaping disc onto the disc holder , and make sure it is rmly xed on the disc
holder. (Fig. 10)
Note: Make sure the inner cavity of the shaping disc and disc holder is properly tted.
(Fig. 11)
5 Attach the front panel to the main unit. (Fig. 12)
Note:
y Make sure the front panel is completely fastened before using the appliance.
y The front panel is heavy. Take extra caution when assembling it.
6 Fasten the front panel control knobs. (Fig. 13)
Note: If the front panel or the shaping disc is not properly assembled, a safety switch
will prevent the appliance from working.
7 Close the mixing chamber lid. (Fig. 14)
Note: If the mixing chamber lid is not properly installed, the safety switch will prevent
the appliance from working.
Using the Pasta maker
Start preparation
1 Put the plug in the power socket. The pasta maker sound once, and all indicators ash
once. (Fig. 15)
Note: Make sure that all the parts are well assembled before plugging in.
2 Press the On/o button to turn on the appliance. (Fig. 16)
3 Select the pasta type with the Program selection button. (Fig. 17)
Program Tip Optional recipe
Plain pasta/noodle • Pasta with our and water
only
• Wheat noodle
• Durum noodle
Egg or avoured
pasta/noodle
• Pasta with our and egg liquid
• All kinds of avored pasta
• Wheat pasta
• Durum pasta
• Carrot pasta/noodle
• Tomato pasta/noodle
• Soba
• Beet pasta/noodle
Note: For more recipes, refer to the recipe book.
4 Remove the mixing chamber lid. (Fig. 3)
5 Wait until 0:00 displays on the screen. (Fig. 18)
6 Pour the our into the chamber. (Fig. 19)