11
3 Repeat step 2 to attach the right speaker.
Attach the stand
1
Slide the supplied table stand onto the
bottom of the main unit.
3 Get started
Caution
Use of controls or adjustments or performance of •
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
back of the apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Attach speakers to the main
unit
1
Place the main unit on a soft and fl at
surface.
Ensure that the bottom side faces •
upwards.
2 Attach the left speaker to the left side of
the main unit.
English
EN
To Next Page
Loading...
