20
6 Use more of
your home
theater system
Set timer
The home theater system can turn on
automatically at a set time.
1 Ensure that you have set the clock
correctly.
2 In standby mode, press and hold TIMER.
The TIMER is displayed and hour digits »
begin to blink.
3 Press + VOL - to set the hour.
4 Press TIMER to confi rm.
The minute digits begin to blink.»
5 Press + VOL - to set the minute.
6 Press TIMER to confi rm.
The mode indicator begins to blink.»
7 Press + VOL - to select [ON] (on).
A clock icon appears on the display.»
The system turns on automatically »
at the set time and switches to USB
mode.
To deactivate the alarm timer, repeat »
steps above and select [OFF] (off)
mode.
Set sleep time
1
When the system is turned on, press
SLEEP repeatedly to select a set period of
time (in minutes).
The system turns off automatically in »
the selected time.
EN
To Next Page
Loading...
