18
2 To return to normal play, press REPEAT
until the selected function is no longer
displayed.
Random play
1 Press SHUF.
All tracks are played randomly.»
2 To return to normal play, press SHUF again.
Tip
The repeat and shuffl e functions cannot be activated at •
the same time.
Program tracks
You can arrange the playback order of the
tracks. You can store up to 20 tracks.
1 In stop mode, press PROGRAM to activate
the programming mode.
» [01 P-00] is displayed.
2 Press ALB/PRESET/ to select the album
where the track is located.
3 Press / to select a track number
to program, then press PROGRAM to
confi rm.
» [P-X] is displayed, where “X” is the
current position in the program.
4 Repeat steps 2 to 3 to select and store all
tracks to program.
5 Press to play the programmed tracks.
To erase the program, press •
PROGRAM in stop mode.
Play connected AV devices
Note
• Ensure that you have made the necessary AV
connections. (see ‘Connect AV devices’ on page 13)
1 Press AV, HDMI, or COAX/OPT to select
an AV source.
4 Play
Play from USB
Note
• Ensure that the USB device contains playable music.
(see ‘USB playability information’ on page 23)
1 Flip open the cover on the front panel.
2 Insert the USB plug of a USB device into
the
socket.
3 Press USB to select the USB source.
The total number of tracks is displayed.»
4 Press ALB/PRESET/ to select a folder.
5 Press / to select a fi le.
6 Press to start play.
During play, press and hold •
or
to search fast backward or forward.
Press•
to pause or resume play.
Repeat play
1 During play, press REPEAT repeatedly to
select:
» [REPEAT] (repeat): play the current
track repeatedly.
» [REPEAT ALL] (repeat all): play all
tracks repeatedly.
EN
To Next Page
Loading...
