15
Tip
You can connect all the devices to the home theater •
system at the same time.
Connect power
Caution
Risk of product damage! Ensure that the power supply •
voltage corresponds to the voltage printed on the back
or the underside of the product.
Risk of electric shock! When you unplug the AC power,
•
always pull the plug from the socket. Never pull the
cord.
Note
Before connecting AC power, ensure you have •
completed all other connections.
1 Connect one end of the power plug to the
DC IN and SUBWOOFER OUT socket
on the main unit.
3 Press HDMIto select HDMI 1 or HDMI 2.
Connect coax supported devices
The home theater system can decode digital
audio signal. You can connect the system to your
digital amplifi er or receiver.
1 Connect the supplied coaxial cable to the
COAXIAL socket on the system and the
COAXIAL/DIGITAL output socket on the
connected device.
You can connect an optical cable (not •
supplied) to the OPTICAL socket
on the system and the COAXIAL/
DIGITAL output socket on the
connected device.
OPTICAL
HDMI OUTHDMI IN 1 HDMI IN 2
DIGITAL OUT
Amplifier
English
EN
To Next Page
Loading...
