EasyManua.ls Logo

Philips HTS3300 - Basic Connections; Step 1: Set-up the speakers; Step 2: Placing the speakers and subwoofer

Philips HTS3300
45 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English
9
3139 115 2xxx1
You can choose to hang the speakers on
the wall. Attach the supplied bracket
firmly to the rear of speakers using the
supplied screws. Then mount a screw
(not supplied) on the wall where the
speaker is to be hung and hook the
speaker securely onto the mounted
screw.
CAUTION!
You should get a qualified person to
attach the brackets to the wall. DO
NOT do it by yourself in order to
avoid unexpected damage to the
equipment or injury to personnel.
Helpful Hints:
The rear speakers are labelled as REAR L
(left) or REAR R (right).
The front speakers are labelled as
FRONT L (left) or FRONT R (right).
Step 1: Set-up the speakers
Basic Connections
For best possible surround sound, all the
speakers (except subwoofer) should be
placed at the same distance from the
listening position.
1 Place the front left and right speakers at
equal distances from the TV and at an
angle of approximately 45 degrees from
the listening position.
2 Place the centre speaker above the TV or
the DVD system so that the centre
channel’s sound is localised.
3 Place the rear speakers at normal
listening ear level facing each other or
hang on the wall.
4 Place the subwoofer on the floor near
the TV.
Helpful Hints:
To avoid magnetic interference, do not
position the front speakers too close to your
TV.
Allow adequate ventilation around the
DVD system.
Step 2: Placing the speakers
and subwoofer
REAR RREAR L
FRONT RFRONT L
CENTER
SUBWOOFER
1
33
1
2
4

Table of Contents

Other manuals for Philips HTS3300

Related product manuals