To Next PageTo Next PageHow to fix a Philips Home Theater System remote control that is not responding?
If your Philips Home Theater System remote control isn't working, try the following: First, ensure the product is connected to a power outlet. Then, point the remote directly at the product. Also, check that the batteries are inserted with the correct polarity or try inserting new batteries.
How to fix Philips Home Theater System when it cannot connect to the network?
If your Philips Home Theater System cannot connect to the network, check if the network connection is properly made, turn on the modem or router, and verify the network settings. Ensure the router and/or modem is correctly connected. Check the BD-Live™ setting in “Manual Setup”. If connecting directly to a modem via a LAN cable, power cycle the modem to reset settings.
Why Philips HTS3306 cannot play back a disc?
If your Philips Home Theater System cannot play back a disc, first make sure that the product supports the disc type. Then, check the region code of the disc. For DVD-RW/-R, ensure that the disc is finalized. Finally, try cleaning the disc.
What to do if Philips HTS3306 buttons do not work?
If your Philips Home Theater System buttons aren't working or the unit stops responding, try completely resetting it by pressing and holding the standby/on button on the front panel for 10 seconds to shut down the unit, or unplug the AC cord from the AC outlet for 15-20 seconds.
How to get audio from TV speakers via HDMI with Philips HTS3306 Home Theater System?
If you're not getting audio from the loudspeakers of your TV connected via an HDMI cable to your Philips Home Theater System, set “Audio Output” to “HDMI Normal” or “HDMI LPCM” in the setup menu. Also, make sure that the TV speakers are turned on and not muted in the TV menu.
Why is there no high-definition video signal on the TV screen from Philips Home Theater System?
If there's no high-definition video signal on your TV screen when using your Philips Home Theater System, check if the disc contains high-definition video and if your TV supports high-definition video.
What to do if there is no video signal on the display device with Philips HTS3306 Home Theater System?
If you're not getting a video signal on your display device with the Philips Home Theater System, first, make sure the TV is turned on and set to the correct external input. If the issue persists, select the correct video resolution in the “HDMI Video” settings menu. As a last resort, press and hold the play button on the front panel for 5 seconds to revert to the default settings.
What to do if there is no audio from the Philips HTS3306 Home Theater System speaker system?
If you're not getting any audio from your speaker system, first, try increasing the volume. If that doesn't work, go into the setup menu and set “Audio Output” to “Speakers”. Also, ensure that the audio isn't muted and that you've selected the correct active source for external audio input.
How to enable 5.1-channel audio on my Philips Home Theater System?
If you're not getting 5.1-channel audio from your Philips Home Theater System, first, confirm that the disc actually contains 5.1-channel audio. Then, set “Audio Output” to “Speakers” in the settings menu. Also, check that the surround mode is not set to “2.1ch Stereo”; if listening to a stereo source, press [SURROUND] and select “Dolby Pro Logic II Music” or “Dolby Pro Logic II Movie”.
Sound Specifications| total power (RMS) | 1000 W |
|---|---|
| center frequency range | 180-20000 Hz |
| satellite speaker frequency range | 180-20000 Hz |
Power| power supply voltage | 120V |
|---|---|
| power supply frequency | 60Hz |
Loudspeakers| satellite speaker drivers | 3" full range woofer |
|---|---|
| satellite speaker impedance | 4 ohm |
| subwoofer driver | 6.5" high efficiency woofer |
| subwoofer frequency range | 60-80000 Hz |
| subwoofer impedance | 4 ohm |
Weight and Dimensions| set dimensions (W x H x D) | 435 x 59 x 295.6 mm |
|---|---|
| packaging dimensions (W x H x D) | 624 x 362 x 394 mm |
| set weight (with stand) | 3.6 kg |
| weight including packaging | 12.50 kg |
