40
Data fi les (JPEG, MP3, WMA) cannot be
played or read.
Ensure that the data fi le was recorded in •
the UDF, ISO9660 or JOLIET format.
Ensure that the JPEG fi le extension is.jpg, •
.JPG, .jpeg or .JPEG.
Ensure that the MP3/WMA fi le extension •
is .mp3 or .MP3, and .wma or .WMA for
windows Media™ Audio.
DivX video fi les cannot be played.
Ensure that the DivX video fi le is •
complete.
Ensure that the fi le name extension is •
correct.
The contents of the USB fl ash drive cannot
be read.
The USB fl ash drive format is not •
compatible with this product.
Drive is formatted with a different fi le •
system which is not supported by this
product (e.g. NTFS).
‘No entry’ sign appears on the TV.
The operation is not possible.•
Unable to access BD-Live feature.
Check the network connection or ensure •
that the network has been set up.
Clear local storage, internal memory (if •
any) or USB.
Ensure that the BD disc supports the BD •
Live feature.
No sound on HDMI connection.
If the connected device is not HDCP-•
compliant or is only DVI-compatible, you
cannot transmit sound through an HDMI
connection. Use an analogue or digital
audio connection.
Make sure that the •[HDMI Audio] setting
is turned on.
No sound from TV programme.
Connect an audio cable from the audio •
input on this home theatre to the audio
output on your TV. Then press AUDIO
SOURCE repeatedly to select the correct
audio source.
No surround sound effect from the speakers.
Press • SURR. SOUND to select a correct
surround sound setting.
Ensure that the source you play is •
recorded or broadcast in surround
sound (Dolby Digital, etc). Sound cannot
transmit through HDMI connection if
the connected device is non-HDCP
compliant or only DVI-compatible. Make
an analogue or digital audio connection.
Play
Disc cannot be played.
Ensure that this product supports the •
disc. See ‘Specifi cations’.
Ensure that this product supports the •
region code of the DVD or BD.
For DVD±RW or DVD±R, ensure that •
the disc is fi nalised.
Clean the disc. •
EN