17
6 Rinse the humidication lter under a
slowly running tap. Do not squeeze or
wring the lter when cleaning.
7 Let excess water drip off the
humidication lter.
8 Assemble the humidication lter round
the lter support.
9 Put the humidication lter and the lter
support back into the water tank.
10 Put the upper unit back onto the water tank.
Note
•
Do not squeeze or wring the lter. This might damage
the lter and impact humidication performance.
• Do not dry the lter under direct sunlight, unless it is
assembled back onto the lter support