Philips LX7100SA - Other Functions; System Power and Display Control; Recording to External Devices; Operating the Television

41
English
3139 115 22741
Other Functions
Switching on/off
Switching to active mode
● Press SOURCE button to select :
DISC ™ FM TUNER ™ MW TUNER ™
TV/AV ™ AUX ™ DIGITAL IN ™
DISC ....
OR
Press DISC, TUNER, TV/AV or
AUX/DI on the remote.
Switching to Eco Power standby
mode
● Press and hold STANDBY ON (B).
➜ ECO POWER button lights up.
➜ The display screen will go blank.
Switching to standby mode (view
clock)
● Press STANDBY ON (B).
➜ The clock appears.
Dimming system’s display
screen
● Press DIM on the remote repeatedly to
select different levels of brightness for the
display screen.
Recording to an external
device
1
Connect the external recording device to
LINE OUT or DIGITAL OUT.
(See pages 14, 15 “Connections-
optional“).
2 Select the source to record from your
DVD system (DISC, TUNER, TV/AV or
AUX/DI) and start playback (if
necessary).
➜ You can only record from DISC if using
DIGITAL OUT to connect the external
recording device.
3 Start recording on the external recording
device.
Helpful Hints:
– All the sound control features are available
for selection.
– Refer to the owner’s manual of the
connected equipment for details.
Using the remote to operate
your television
4
2
1
3
1 Press TV/AV.
2 Press S / T or use the numeric
keypad (0-9) to select the TV’s channel.
3 Press TV VOL +/- to adjust the TV’s
volume level.
4 Press B to turn off your TV.
001-045-LX71-22-Eng 8/07/2003, 11:27 AM41