English
21
3139 115 23481
Getting Started
Step 3: Setting language
preferences
You can select your preferred language
settings so that this DVD system will
automatically switch to the language for
you whenever you load a disc. If the
language selected is not available on the
disc, the disc’s default setting language will
be used instead. The OSD (on-screen
display) language for the system menu will
remain as you set it, regardless of various
disc languages.
On-screen display (OSD) language
1 In disc mode, press SYSTEM MENU.
2 Press 2 to select {GENERAL SETUP
PAGE}.
3 Press 34 to highlight {OSD
LANGUAGE}, then press 2.
4 Press 34 to select a language and press
OK to confirm.
Audio, Subtitle and Disc menu
languages
1 Press Ç twice to stop playback (if any),
then press SYSTEM MENU.
2 Press 2 repeatedly to select
{PREFERENCE PAGE}.
3 Press 34 to highlight one of the options
below at a time, then press 2.
–{AUDIO} (disc’s soundtrack)
–{SUBTITLE} (disc’s subtitles)
–{DISC MENU} (disc’s menu)
DIVX SUBTITLE
4 Press 34 to select a language and press
OK to confirm.
If the language you want is not in
the list, then select {OTHERS}.
Use the numeric keypad (0-9) on the
remote to enter the 4-digit language code
‘XXXX’ (see page 49) and press OK to
confirm.
5 Repeat steps 3~4 for other settings.
TIPS:
To return to the previous menu, press 1.
To remove the menu, press SYSTEM MENU.
001-047-LX85-22-Engfinal 7/8/04, 10:14 AM21
To Next Page
Loading...
