Philips LX8500W Quick Use Guide

Rear of TV
(example only)
VIDEO
AUDIO
OUT IN
S-VIDEO
IN
SCART IN
SCART IN
L
R
O U T
V I D E O
I N
A UD I O
LX8500W
QUICK USE GUIDE
TO AV SUBWOOFER
First connect ...
... then play
12nc: 3139 115 23461
(see next page)
PHILIPS
PHILIPS
MW loop antenna
FM antenna
Scart cable
AV Subwoofer
2
5
1
6
6
FRONT R
FRONT L
CENTER
TV
Helpful Hints
You only need to make one video connection to your
TV in order to view the DVD playback.
If your TV is not equipped with a SCART
connector, connect your TV through the
corresponding video connection A or B (cables not
supplied).
If your TV has progressive scan function,
connect your TV using Y Pb Pr C (cables not
supplied). Refer to page 19 in the user manual for
“Switching to YUV/RGB video output setting” before
use.
REAR R
REAR L
11
11
8
7
9
9
3
matching coloured
stickers
Assemble the
speakers
4
10
810
7
5

Philips LX8500W Specifications

Sound Specifications

D/A converter	24 bit, 96 kHz
frequency response	30-48000 Hz
signal to noise ratio	>95 dB
output power (RMS)	3 x 100W, 2 x 75W + 150W
total sound power (RMS)	600 W
satellite speaker frequency range	120-50000 Hz
satellite speaker impedance	6 ohm
center frequency range	120-30000 Hz
center speaker impedance	6 ohm
subwoofer frequency range	30-120 Hz
subwoofer impedance	4 ohm

Power

power supply	110-240V, 50/60 Hz
standby power consumption	< 1W

Weight and Dimensions

center speaker dimensions	435 x 76 x 70 mm
center speaker weight	1.4 kg
packaging dimensions	1000 x 516 x 495 mm
set dimensions	360 x 40 x 305 mm
set weight	2.5 kg
stand dimensions	95 x 540 x 95 mm
subwoofer dimensions	300 x 400 x 300 mm
subwoofer weight	12 kg
surround speaker dimensions	100 x 550 x 107 mm
surround speaker weight	10.3 kg
weight including packaging	43 kg