Philips LX9000R User Manual

Circuit-, IC descriptions and list of abbreviations
EN 136 LX9000R9.
(“D_IKLL”-line) or the “IPFAIL”-signal from power-supply-unit
(in this case it’s the combination of “A_KILL” and “IPFAIL”).
In addition to that the DAC [7001] and the cinch outputs can be
killed (muted) in case of “digital silence” by the circuit around
[7008], [7009] and [7010], when no audio data are available
(e.g. “D_DATA0”-line zero).
This function can be also activated via the “ION”-line (set to
high during any stand-by mode). To avoid signal distortions
(clipping) the mute transistors for cinch rear out [7415], [7416]
are decoupled via [7011].

Philips LX9000R Specifications

Picture/Display

A/D converter	10 bit, 54 MHz
Aspect ratio	4:3, 16:9
D/A converter	10 bit, 54 MHz

Sound

A/D converter	24 bit, 96 kHz
D/A converter	24 bit, 96 kHz
Distortion and Noise (1kHz)	90 dB
Frequency response	30-20000 Hz
Signal to noise ratio	>100 dB (A-weighted)
Total Sound Power (RMS)	450 W

Loudspeakers

Satellite speaker frequency range	120-20000 Hz
Satellite speaker impedance	4 ohm
Center speaker frequency range	120-20000 Hz
Center speaker impedance	4 ohm
Subwoofer frequency range	30-120 Hz
Subwoofer impedance	8 ohm

Video Playback

Compression formats	MPEG1, MPEG2
Playback Media	DVD+RW, DVD+R, DVD-RW (Video mode), DVD-R, DVD-Video, SVCD, Video CD
Video disc playback system	NTSC, PAL

Video Recording

Audio compression	Dolby Digital
Compression formats	MPEG2
Max recording time on DVD	8 hr
Recording system	NTSC, PAL

Audio Playback

Compression format	Dolby Digital, DTS, MP3, MPEG2 Multichannel, PCM
Playback Media	CD, CD-R, CD-RW, MP3-CD
MP3 bit rates	32-320 kbps and VBR

Storage Media

Disc capacity	4.7 GB
Recording media	DVD+R, DVD+RW
Recording speed	M1, M2, M2x, M3, M4, M6, M8

Tuner/Reception/Transmission

Aerial Input	75 ohm coaxial (IEC75)
Number of Preset Channels	40
Tuner Bands	FM Stereo, MW

Power

Power supply	200-240 V, 50/60 Hz
Standby power consumption	< 2 W