21
English
3103 306 18522
Radio Reception
-
-+
-
OPEN
STANDBY
-
ON
iR
VOL
AUX/ CDR
PROG
PRESET
TAPE
SEARCH/ TUNE
TUNER
DEMO STOPPAUSE
PREV NEXT
REC
STOP
PLAY
BASS TREBLE
-+
CD 1•2•3
MICRO SYSTEM
ECO
POWER
Tuning to radio stations
1 Press TUNER to select TUNER mode.
➜ "TUNER" is displayed. A few seconds later,
the current radio frequency will appear on the
display.
➜ If an FM station is received in stereo, is
displayed.
2 Press TUNER again to select the desired
waveband : FM or AM.
3 Press and hold à or á until the frequency
indication starts to change, then release.
➜ The display will show "SEARCH" until a
radio station with sufficient signal strength is
found.
4 Repeat step 3 if necessary until you find the
desired radio station.
● To tune to a weak station, press à or á briefly
and repeatedly until optimal reception found.
Storing preset radio stations
You can store up to 40 preset radio stations in
the memory.
Automatic Preset Programming
● Plug and Play setting (refer to “Basic Functions -
Plug and Play”).
OR
1 Press TUNER to select TUNER mode.
To begin automatic preset from a desired
preset number
● Press í or ë to select the desired preset
number.
➜ If a radio station has been stored in one of
the presets, it will not be stored again under
another preset number.
2 Press and hold PROG until "AUTO" is displayed.
➜ PROGRAM starts flashing.
➜ All available radio stations with sufficient signal
strength will be stored automatically, starting
from FM and followed by AM band.
➜ When all the available radio stations are
stored or the memory for 40 presets are used,
the last preset radio station will be played.
pg 001-032/MC77/37-Eng 4/16/02, 7:19 PM21
To Next Page
Loading...
