Philips MC-90 - Controls; Controls on the System and Remote Control

12
English
3139 115 20972
Controls (main system’s illustration on page 3)
Controls on the system and
remote control
1 ECO POWER
– to switch the system on or to Eco Power
standby mode.
2 STANDBY ON y
– to switch the system on or to standby mode.
3 Display screen
– to view the current status of the system.
4 CD changer tray (CDC)
5 CD OPEN•CLOSE (CD 1/CD 2/CD 3) 0
– to open or close the individual disc tray :
CD 1, CD 2 or CD 3
6 Source selection – to select the following :
CD 1•2•3 (CD 123)
– to select disc tray 1, 2 or 3.
TUNER
– to select waveband : FM, MW or LW.
CDR
– to select CD recorder.
AUX
– to select the input for an additional appliance.
7 REC LEVEL
– to activate/deactivate the auto level control.
– to activate the volume control for record level
adjustment.
8 CLOCK/TIMER
– to select clock or timer function.
9 MASTER VOLUME (rotary)
(VOLUME +/-)
– to increase or decrease the volume.
– (on the system only) to increase or decrease the
low or high tone level for the respective BASS or
TREBLE sound feature selected.
– (on the system only) to adjust the record level.
– (on the system only) to adjust the hour and
minutes for clock/timer settings.
6
§
≥
•
ª
£
º
9
*
0
!
⁄
9
‹
›
fi
fl
‡
¤
°
)
¡
≤
™
&
)
Notes for remote control:
– First, select the source you wish to
control by pressing one of the source select
keys on the remote control (CD 123 or
TUNER, for example).
– Then select the desired function ( É , í ,
ë , for example).
pg 001-038/MC90/22-Eng 1/29/02, 6:37 PM12