29
English
3139 115 20972
Changing Text
1 In text editing mode, press à or á to move
the cursor.
➜ The cursor position starts blinking.
2 To insert a space, press YES.
➜ A space will be inserted after the cursor.
To delete a character, press NO.
➜ The character before the cursor will be
deleted.
To change the character, adjust JOG
CONTROL (or pressí or ë on the remote
control).
3 Press Ç to exit text editing mode.
Erasing text
1 Press EDIT TEXT (or CD TEXT/EDIT on
the remote control).
➜ EDIT TEXT is flashing and “TEXT EDIT” is
displayed.
2 Adjust JOG CONTROL (or pressí or ë
on the remote control) until “ERASE TEXT” is
displayed.
3 Press YES to confirm.
4 Adjust JOG CONTROL (or pressí or ë
on the remote control) to select one of the
following for erase :
➜ “ALL TXT TR1 (or 2, 3,…)” – all texts of
track 1 (or 2,3,…).
➜ “CD TITLE” – CD artist’s name and CD
title.
➜ “ALL TEXT CD” – all texts of the selected
disc.
5 Press YES to start erasing.
6 Press Ç twice to exit erasing text mode.
Erasing from the memory
When the text memory of your CD recorder is
almost full, the messages “MEMORY FULL” and
“FINALIZE DISC” will be displayed. If you still
want to add a new disc to the text memory, you
have to finalise another disc.
Other Features
pg 001-038/MC90/22-Eng 1/29/02, 6:38 PM29
To Next Page
Loading...
