17
English
3139 115 20972
Display screen selection
Dim mode
You can select the desired brightness for the
display.
● Press DIM on the remote control repeatedly to
select DIM 1, DIM 2, DIM 3 or DIM OFF display
mode.
➜ DIM is shown, except for DIM OFF mode.
DIM
mode
OFF
1
2
3
LEDs
on
partially on
off
off
Brightness
normal
normal
normal
half
Music level
bar
active
off
off
off
+ music level bar
Clock display mode
The clock will always appear on the display
regardless of any source mode (except Eco
Power standby and demonstration mode).
● Press CLOCK/TIMER (or CLOCK on the
remote control) once.
➜ The clock is displayed. If the clock has not
been set, "--:--" is displayed.
● To return to normal display mode, press
CLOCK/TIMER again.
Note:
– If you pressed any keys in clock display mode,
the display will briefly show the information related
to the selected mode.
– If you pressed CLOCK/TIMER while in recording
or menu modes, the clock display will only show for
a few seconds.
Information display
● Press DISPLAY.
During playback, stop or recording;
To view various track’s/disc’s time information.
Volume control
Adjust the MASTER VOLUME to increase
(turn knob clockwise or press VOLUME +) or
decrease (turn knob anti-clockwise or press
VOLUME -) the sound level.
➜ The current volume level is displayed. When
reached the minimum volume level,
"VOL MUTE" is displayed.
To listen through the headphones
● Connect the headphones plug to the
n socket at the front of the system.
➜ The speakers will be muted.
To switch off the volume temporarily
● Press MUTE on the remote control.
➜ Playback will continue without sound and
"MUTE" is displayed.
● To restore the volume, press MUTE again or
increase the volume level.
Basic Functions
To Next Page
Loading...
