Philips MC-90 - External Recording; Analogue or Digital Recording; Automatic Track Increment; Synchro Start Recording

26
English
3139 115 20972
EDIT TEXT
NO
SEARCH/
TUNE TUNE
SEARCH/
Cancel
STOP
PROG
JOG CONTROL
COPY CD
COMPILE CD
ERASE
CD
CDR
TUNER
AUX
FINALIZE
CD
PLAY/
PAU SE
RECORD
CD 1• 2•3
PREV
PRESET
NEXT
PRESET
Enter
NO
YES
External recording
Analogue or digital recording
When making recordings from an external
source, we recommend doing analogue
recording only if digital recording is not possible.
Digital recording will usually result in
better sound quality.
Automatic track increment
This feature enables the recorded tracks to be
positioned same as on the original source
material.
When making digital recording from a
digital source (for example, CD player), tracks
will be incremented automatically.
When making analogue recording from a
digital or analogue source, select one of the
following track increment settings.
● In stop mode, press TRACK INCR. on the
remote control repeatedly to select :
➜ “MANUAL” : for switching the function off.
➜ “TURNTABLE” : for optimal recording from
noisy sources like turntables.
➜ “TAPE/ TUNER” : for optimal recording from
a tape.
➜ “CD/DVD” : for optimal recording from high
quality sources like DAT, DCC or DVD.
Notes:
– Track numbers can be incremented manually by
pressing TRACK INCR. on the remote control during
recording. The minimum track length is four
seconds.
– Track numbers cannot be changed after
recording.
Synchro start recording
1 Press AUX repeatedly to select the input for
the external source you want to record from.
➜ “AUX DIGITAL” : for digital input.
➜ “AUX ANALOG H” : for analogue input from
a standard level source.
➜ “AUX ANALOG L” : for analogue input from
a low level source (when sound of external
source is too low compared to the internal tuner
or CD changer).
2 Press RECORD.
3 Adjust JOG CONTROL (or pressí or ë
on the remote control) to select :
➜ ”AUX CD?” : for recording with synchronised
start of an entire disc.
➜ ”AUX TRACK?” : for recording with
synchronised start of a single track.
4 Press YES to confirm.
➜ “START EXTERNAL SOURCE” is displayed.
5 Start playback on the external source you want
to record from.
➜ The CD recorder starts to record
simultaneously. The remaining recording time on
the CDR(W) is displayed.
Note:
– If you start playback on the selected source
within a track, recording will start at the beginning
of the next track.
Recording
pg 001-038/MC90/22-Eng 1/29/02, 6:38 PM26