Philips MCB275/05B - CD Operations; Selecting and Searching Tracks; Programming Tracks

18
English
CD
Helpful hints:
– If you have not organized MP3/WMA files into
any albums on your disc, an album “00” will be
automatically assigned for all those files.
4 Press ÉÅ to start playback.
➜ Display shows current track number and
elapsed playing time.
5 To pause playback, pressÉÅ. To resume
playback, press the button again.
6 To stop playback, press STOPÇ.
Helpful hints:
CD playwill also stop when
– the CD door is opened
– the disc has reached the end
– you select another source: DAB, FM, USB or
AUX
Selecting and searching
Selecting a different track
● Press 4 / ¢ (or ¡ / ™ on the remote
control) once or repeatedly until the desired
track number appears in the display.
MP3: ➜ Tr ack information scrolls briefly.
MP3:
● Press ALBUM/ PRESET +/- (or ALB +/- on
the remote control) once or more to select the
next or previous album.
➜ Tr ack information scrolls briefly.
or
● In the stop position, press ALBUM/ PRESET
+/- (or ALB +/- on the remote control) and
4 / ¢ (or ¡ / ™ on the remote control)
to select the desired album and track.
➜ MP3: Display shows current album/
track number.
Finding a passage within a track
during playback
1 During playback, press and hold 4 / ¢
(or 5 /6 on the remote control).
➜ The CD plays at a high speed.
2 When you recognize the passage you want,
release 4 or ¢ (or 5 /6 on the remote
control).
➜ Normal playback resumes.
Programming tracks
You may store up to 32 tracks in the desired
sequence. If you like, store any track more than
once.
1 In the stop position, press SCAN/PROGRAM
(or PROG on the remote control) to star t
programming.
➜ Audio CD: Display shows PROG and current
track number.
MP3: Display shows current album/track
number.
2 Press 4 / ¢ (or ¡ / ™ on the remote
control) once or repeatedly until the desired
track number appears in the display.
● MP3: press ALBUM/ PRESET +/- (or ALB
+/- on the remote control) and 4 / ¢ (or
¡ / ™ on the remote control) to select the
desired album and track.
3 Press SCAN/PROGRAM (or PROG on the
remote control) to confirm.
➜ Display shows briefly the number of tracks
programmed.
➜ Then, the display shows the track number
you just stored.
P001-P030_MCB275_05_Eng 2007.6.13, 10:2818